Gehaka G650i, User Manual

Page: 14 / 48

14
I
Moisture Meter G650
i
2. Install the Weighing Cup on the G650
i
. If the scale
is not indicating the 0.0g reading, use the YES key
for taring (zeroing) the scale..
3. Remove the Weighing Cup from the G650
i
, place
it on a table and pour the sample until it richly
overflows the cup. The overflow is important to
standardize the amount of grains inside the Cup.
4. Wipe off the Weighing Cup using the Scraper. Make
a slow movement removing the excess of grains in
the Cup. If necessary wipe off more than once, and
leave the grains leveled to the Cup edge. The
measurement quality depends on this precaution.
5. Place the Weighing Cup back on the G650
i
, it will indicate the sample Density
considering the Weighing Cup volume and the sample weight. The scale
maximum load is 700g.
6. If the RIGHT-HAND ARROW is depressed, a report with the result will be printed,
as shown below::
342.6 g
70.0 kh/hL