Working Platform
Assembly and Operating Manual
Page 32 of 52
BL 061 U Edition 06.2007
9.3.7
Feeding in the drive and safety rope
ATTENTION NOTE
It is only allowed to use the winches with original GEDA ropes or ropes which are approved supplier
from GEDA
NOTE
Always use the appropriate length for the height that you are using the platform for. If the rope is too
long the upper part of the rope wears unnecessary out and the complete working life of the entire rope
length will be reduced.
9.3.7.1
Feeding in rope on the C-clamp
•
The drive rope (1) and
safety rope (2) are inserted
in accordance with the
adjacent Fig.
ATTENTION:
Do not mix up drive and safety
ropes!
Fig. 35 Insert rope on C-clamp
2
1
