GeChic On-Lap M505T/I, User Manual

Page: 14 / 40

8
Section 7 Installation of VESA 100 Arm or Wall Mount
Please follow the steps below to assemble .
○
1
Screw the M505 VESA 100 Bracket (Optional) to the I/O base
of the monitor by 4 M4 screws.
○
2
Clip the monitor screen and VESA 100 aluminum alloy bracket
together by two clips to prevent the screen from falling down.
○
3
Screw M505 VESA 100 bracket onto a monitor arm or wall mount
by 4 M4 screws.
Chapter 3 Hot Keys, LED and OSD Menu Instructions
Section 1 Hot Keys & LED Indications
Do not press any two shortcut keys at the same time, otherwise the buttons may not
respond or react incorrectly.
1. LED Light Description
It shows green light when On - Lap Monitor turns on and shows red light when it stands
by. There is no light when the monitor is off.
2. Hot Keys Description