GEA ONE 11TS, Instructions For Use And Maintenance Manual

Page: 161 / 301

ONE 7TS – Maintenance
page 7.58
This manual is property of
GEA Niro Soavi S.p.A.
and no part of it may be reproduced.
Instructions for assembly
To remove proceed as follows, with reference figure 7-28:
- insert the gasket
(5)
on the stem of the pressure gauge (needed only for protection against soil)
- insert the gasket
(2)
into its seat in the flange or in the head; food-grade vaseline or we recommend us-
ing food-grade vaseline or another suitable lubricant to facilitate assembly operations
- insert the flange
(6)
on the body of the pressure gauge (1) and position the two half-rings
(4)
to keep the
flange in position
- insert the prepared pressure gauge into its seat and position the flange
(6)
on the stud bolts
(8)
- screw the nuts
(7)
manually before tightening them fully.