Installing ADAPTA bearing supports size 1 and 2
Fasten the bearing cover (0360.01), using the
spring washers (0934.05) and hex head screws
(0901.04).
torque: 6 ft lb (8 Nm)
Fig.23:
Bearing cover
Push the V-ring (0507.05) with greased sealing lip
onto the shaft (0211.00) so that the sealing lip
contacts the bearing cover (0360.01).
Fig.24:
V-ring
Push the V-ring (0507.02) with greased sealing lip
onto the shaft 0211.00 so that the sealing lip
contacts the bearing support (0330.00).
Fig.25:
Position V-ring
Insert the feather key (0940.01) into the shaft
(0211.00).
Do not use a mallet! The bearings could be
damaged.
Fig.26:
Feather key
Malfunctions / repairs
Repair
BA.H2A.ADY.002.GB_1
18.12.2017
59
