Operation
Safety instructions for operation
2007-9015-001
03-2014
Carry out the following checks before every start:
● Check and make sure that all of the safety devices (safety guard,
emergency-off switches, etc.) are present and working.
● Check the product for visible damage; immediately repair without any delay
damage found (note: personnel qualification required) or send to the
specialist dealer - the product may only be used if in perfect condition.
● Check and make sure that only authorized personnel are in the work area
of the machine and no one will be endangered by the machine starting.
● Check and make sure that there are no unnecessary object or material is
located in the working area.
● Check and make sure that the working area has been cleaned from oil,
grease, parts...
● Make sure the hydraulic circuit of the hydraulic power unit contains sufficient
hydraulic oil.
● Make sure 2 ball valves of hydraulic power unit have been opened.
In normal operation:
● All personnel who perform work on or with the product must carefully read,
understand and act in accordance with the instructions.
● Do not remove or deactivate safety devices during operation.
● During operation, it is strictly forbidden to remain within the hazard area!
● Operating personnel must make sure that no unauthorized personnel are
in the working area.
● The following checks should be performed at least once a day:
- Visually check for any damage.
- Check that all safety devices are working.
