Maintenance
Safety instructions for maintenance
2007-9015-001
03-2014
Special risks involved in maintenance work:
● Serious damage to property might occur if wrong replacement or wearing
parts are installed.
● If energy sources are switched on unintentionally, this may lead to serious
bodily injury or damage to property.
● There is a risk of injury from components/tools... with accessible sharp
edges.
● There is a fire hazard associated with welding, cutting and grinding work.
● The careless use of personal protection equipment can result in serious
physical injury.
● Leaking lubricants, solvents,... can cause injury if they come into direct
contact with the skin and could make the floor surface slippery which could
result in dangerous fall.
● Hydraulic hoses failures may cause unexpected movements.
● Serious injury to personnel or damage to property can be caused if the
incorrect torque is applied when tightening screws.
● Unsecured manual operation means a higher risk of injury due to
crushing/shearing/being pulled in/...
After completing the maintenance work, check the following:
● Replace all guards, cover,... removed for maintenance.
● That all safety devices are in good working condition.
● Remove from the working area all the tools, materials and other equipment.
● Remove and clean oil, grease, parts from the working area.
● The operation making sure all is working properly.
