Operating
Disconnecting
2018-9015-005
09-2016
68 / 118
7.10
Disconnecting
PTO driveline disconnection
Warning!
Turn off the tractor and apply the hand brake before connecting or
disconnecting the PTO driveline.
Attention!
Keep all hose couplings clear of dirt and sand when disconnected.
Always hook them on their supports.
Note!
Refer to the PTO driveline instruction manual and follow the
manufacturer's recommendations.
● Remove the safety chain, if
applicable. (European model not
illustrated);
● Disconnect the PTO from the tractor;
● Place the PTO driveline end on the
draw bar support (1);
1
● Disconnect the spreader hydraulic
hoses and pneumatic hoses from
the tractor, if applicable. Place the
connectors in the corresponding
support (2);
● Disconnect the electrical outlet and
place it in the corresponding support
(3);
2
3
Unhitching the spreader
● Keep the spreader on a flat and level
surface;
● Place wheel chocks;
● Remove the manual jack (1) from the
transportation support (2);
● Place the jack on the draw bar,
secure with a safety pin (3);
● Adjust the spreader height;
2
3
1
