– 22 –
Power Connector Plug 15 Amp - 265 VAC,
2.55 KW Heater (RAK5172)
The L1 side of the line is connected to terminal #3
and L2 is connected to terminal #8. The ground wire
is connected to terminal #5. There are jumper wires
between terminals #1 and #2, and #2 and #6.
#1 TERM
KEY
LATCH
TERMINAL END VIEW
BOTTOM
RAK5172
L2
L1
G
Heater Circuit Schematic 15 Amp - 265 VAC,
2.55 KW Heater (RAK5172)
When the relay contacts close, the circuits to the
1.55 KW and 1 KW heaters are completed from L1
through the jumper wires between terminals #1 and
#2, #2 and #6, and back to L2 through terminal #8.
This makes a total of 2.55 KW of heat available to
heat the room.
HEATER CIRCUIT - 265V
2.55 KW HEATER
RAK5172
Power Connector Plug 20 Amp – 265 VAC,
3.45 KW Heater (RAK5202)
The L1 side of the line is connected to terminal #3
and L2 is connected to terminal #8. The ground wire
is connected to terminal #5. There are jumper wires
between terminals #1 and #2, and #2 and #4.
#1 TERM
KEY
LATCH
TERMINAL END VIEW
BOTTOM
RAK5202
L2
L1
G
HEATER CIRCUIT - 265V
3.45 KW HEATER
RAK5202
Heater Circuit Schematic 20 Amp - 265 VAC,
3.45 KW Heater (RAK5202)
When the relay contacts close, the circuits to the
2.45 KW and 1 KW heaters are completed from L1
through the jumper wires between terminals #1 and
#2, #2 and #4, and back to L2 through terminal #8.
This makes a total of 3.45 KW of heat available to
heat the room.
