XMTC User’s Manual
35
Chapter 3. Operation and Programming
3.9 Factory Cal
The XMTC comes completely preprogrammed from the factory for your particular application. Should it become
necessary to reprogram the meter, you can use the
Factory Cal
option.
IMPORTANT:
Do not use the
Factory Cal
option without referring to the
Calibration Data Sheet
enclosed with your
XMTC. Varying from the parameters on the sheet can result in problems with the XMTC and other
equipment.
From the
Edit Functions
menu (shown in
Figure 10 on page 20
), click on the
Factory Cal
option. A window similar to
Figure 39
below opens.
Figure 39:
Factory Cal
Window
The option permits you to edit the number of points and the value of each individual point.
3.9.1 Edit # of Points
To edit the number of available points, click on
Edit # of Points
. A window similar to
Figure 40
below opens.
Figure 40:
Edit # of Points
Window
Click on
Add
once for each point you wish to add, or on
Delete
once for each point you wish to remove. Then click on
Next Item/Enter
to confirm the entry. (Click
Previous Item
or
Exit Page
to close the window without changing the
number of points.) You are then returned to the
Factory Cal
window, which displays the new number of points.
Summary of Contents for XMTC
