GE Vscan Air, Manual

Page: 175 / 407

Configuration
Vscan Air
–
User Manual
4-23
Direction GP092020-1EN Rev 18
Configure DICOM Image Server (continued)
4. Press “ Verify Server ” to verify communication with the
DICOM Image Server.
“Verify server succeed” pop-up message displays if the
communication with the Server is established successfully.
Press
OK and then Press “ Add ” to add the DICOM Image
Server.
If communication fails, check the server settings and make
necessary corrections.
Figure 4-24. DICOM Image Server
NOTE: Make sure that the display device hosting Vscan Air app
and the PC in which server is configured are connected to
same network.