GE Vivid S60N, Basic Service Manual

Page: 308 / 478

D
IRECTION
FR091521, R
EVISION
1 V
IVID
S60N/V
IVID
S70N B
ASIC
S
ERVICE
M
ANUAL
8-78 Section 8-4 - Cables - Replacement Procedures
P R E L I M I N A R Y
8-4-2 Peripheral Power Output Cable (Printer-to-AC Box) Replacement Procedure
8-4-2-1 Tools
Phillips screwdriver
8-4-2-2 Time Required
20 min
8-4-2-3 Preparation
Shut down the Vivid™ S60/Vivid™ S70 ultrasound unit, as described in Power Shut Down on page 4 - 7 .
8-4-2-4 Peripheral Power Output Cable (Printer-to-AC Box) Removal Procedure
1) Remove the following covers: left side , front , left rear :
2.) Disconnect the Peripheral Power Output Cable (Printer-to-AC Box) from the rear of the printer as
shown in Figure 8-99 .
3.) Disconnect the system’s main power cable from the AC Distribution Box as described in
AC Distribution Box Removal Procedure on page 8 - 139 .
4.) Unscrew the Ground securing screw as described in AC Distribution Box Removal Procedure on
page 8 - 139 .
FRU Part #
Refer to
Table 9-20
on page 9-19
.
• Air Inlet (Left Side) Cover Removal Procedure on page 8 - 7
• Front Cover Removal Procedure on page 8 - 16
• Left Rear Cover Removal Procedure on page 8 - 23
Figure 8-99 Peripheral Power Output Cable (Printer-to-AC Box)