background image

 

TruVision DVR 20 User Manual 

113 

Chapter 9

 

Troubleshooting 

Place the TVR 20 in well-ventilated space so that it operates within the allowed 
range of temperature and humidity as in specification. 
If the circuit board is wet, dust on circuit board can cause a short circuit. The 
circuit board, plug and socket, housing fan and housing should be cleaned by 
brushing regularly. 
 

Failure 

Possible reasons and actions to take 

After plugging in -the unit, the 
POWER LED on the front panel does 
not turn on.  

Unit is not connected to the power supply unit. (PSU). 

Check the connections. 

Power supply is not functioning. 

Check whether the LED 

on the PSU is lit. If not, please contact your local supplier.

 

There are no images in the monitor 
connected to Mon A after TVR 20 is 
started. 

Mon A (BNC) monitor has been connected but VGA 
monitor connection is default. 

Activate the Mon A (BCN) 

connection by pressing the EXPORT button on the front 
panel for several seconds. 

The cable connected with the monitor has failed. 

Check 

the cables.

 

Cannot find the hard drive during the 
reboot process. 

Hard drive failure. 

Please contact your local supplier.

 

Cannot retrieve data on playback. 

Hard drive failure. 

Please contact your local supplier.

 

TVR 20 cannot control PTZ cameras 
through the PTZ port. 

Connection cable is not connected properly or not 
functioning. 

Check the cables.

 

PTZ parameters error. 

Check the settings. 

PTZ port failure. 

Please contact your local supplier.

 

Cannot control the TVR 20 with a 
keypad. 

Connection cable is not connected properly or not 
functioning. 

Check the cables.

 

PTZ parameters error. 

Check the settings. 

PTZ port failure. 

Please contact your local supplier.

 

Summary of Contents for TruVision DVR 20































































































































Reviews: