manualshive.com logo in svg

GE TruVision DVR 20, User Manual, Page: 107 / 126

Share
Download
GE TruVision DVR 20 User Manual Download Page 107

 

TruVision DVR 20 User Manual 

103 

Chapter 7

 

Web browser 

This chapter describes how you can use the Web browser interface to configure the 
device, play back recorded video, search through event logs, and control a PTZ 
camera. You can also specify settings on the Web browser interface to optimize video 
playback and recording performance when operating in a low or limited bandwidth 
environment. 

Accessing the Web browser 

To access the TVR 20, open a Web browser and enter the IP address assigned to the 
TVR 20, as a Web address. On the logon screen, enter the default user ID and 
password. 

Note: 

Only one DVR can be viewed per browser. 

User ID: admin 
Password: 1234 
The Web browser uses the following ports. 
•   IP address - 192.168.1.82 
•   Subnet mask - 255.255.255.0 
•   Gateway address - 192.168.1.1 
•   Video Port: 1600 
•   HTTP Port: 80 

Summary of Contents for TruVision DVR 20































































































































Reviews:

No comments