GE TruVision DVR 20, User Manual, Page: 99 / 126

53BChapter 6: Advanced setup
TruVision DVR 20 User Manual 95
Figure 46: System screen
System time and date
Configure the TVR 20 system date and time in the Date/Time screen. This screen also
lets you enable Daylight Savings Time (DST) and format the date and time displayed
on-screen.
To configure the system date and time:
1. In the Menu toolbar click the System icon to display the System setup screen.
2. Select the Date/Time subscreen.
3. Enter the current date in the Date box.
4. Enter the current time in the Time box.
5. Select a date format in the Date Format box.
6. Select a time format in the Time Format box.
7. Enable or disable the network time protocol (NTP). NTP is a protocol to
synchronize the clocks of computers over a network.
8. If NTP option is enabled, enter an NTP server address such as:
server 0.europe.pool.ntp.org
9. Select your time zone in the Time Zone box.
10. Select an NTP update interval in the NTP Update Interval box.
11. Check the Daylight Saving Time and enter the start date, time, and day of the
month, and the end date, time, and day of the month.
12. Changes are saved when you leave the screen.