GE Transport PT878 User Manual Download Page 96

Page: 96 / 297

Chapter 4. Creating and Managing Sites

Transport® Model PT878 Portable Liquid Flowmeter User’s Manual

4.1.7 Deleting a Site

To delete a site in the Site Manager, first be sure you have highlighted that
site in the left window of the Site Manager. Then press

[MENU]

to open the

File Menu, scroll to the Delete option, and press

[ENTER]

. The screen

appears similar to Figure 47 below.

Figure 47: Delete Confirmation Window

•

Press

[F2]

, No, to cancel the deletion and return to the Site Manager, or

•

Press

[F3]

, Yes, to delete the site.

The Site Manager appears, with the highlighted site now deleted.

1 View

Programming

Site Manager

Yes

Info:DEFAULT

GLOBAL

File

DEFAULT

Delete Confirmation

Res

Delete The Site ‘A.SIT’
Are You Sure?

Summary of Contents for Transport PT878










































































































































































































































































































Search results

Summary of Contents for Transport PT878

Reviews:

Brands by name

Popular brands

GE Transport PT878, User Manual

Search results

Summary of Contents for Transport PT878

Reviews:

Brands by name

Popular brands