Chapter 3. Programming Site Data
62
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
3.11 Entering User Functions (cont.)
2.
The next prompt asks you to create a label for the function. The label
corresponds to the measurement type (i.e., velocity or temperature),
while the units symbol corresponds to the measurement units (i.e.,
feet/sec or degrees F).
a.
Press
[ENTER]
to open the text creation window, which appears
similar to Figure 33 below.
Figure 33: Text Creation Window
b.
Use the four arrow keys to scroll to the desired letter or symbol, and
press
[ENTER]
to add the letter to the label.
Note:
Pressing
[SEL]
causes the screen to alternate between a set of
upper-case (capital) letters, a set of lower-case letters, and a set of
symbols. Use all three screens to create a desired label.
c.
Repeat this procedure for each letter or symbol you wish to add to
the label. If you wish to delete a letter, press
[F1]
(Delete) to erase
each letter or symbol, from right to left on the label.
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 . , “ ‘
= < >
Delete
Cancel
OK