GE Transport PT878 User Manual Download Page 92

Page: 92 / 297

Chapter 4. Creating and Managing Sites

Transport® Model PT878 Portable Liquid Flowmeter User’s Manual

4.1.2 Opening an Existing Site

If you want to return to a site you have previously saved, first highlight the
replacement site in the left window of the Site Manager. Then press

[MENU]

to open the File Menu. Scroll to the Open option, and press

[ENTER]

. The

screen appears similar to Figure 43 below.

Figure 43: Open Site Confirmation Window

•

Press

[F2]

(No) to cancel opening the site and return to the current site,

•

Press

[F3]

(Yes) to open the site.

If you have changed the current site, the PT878 asks if you want to save the
changes to the previously opened site.

•

Press

[F2]

(No) to cancel the changes, or

•

Press

[F3]

(Yes) to confirm and save the changes.

The PT878 returns to Operate Mode, with the selected site displayed in the
upper left corner of the screen.

1 View

Programming

Site Manager

Yes

Info:DEFAULT

GLOBAL

File

DEFAULT

Open Confirmation

Res

Open File DEFAULT
Are You Sure?

Summary of Contents for Transport PT878










































































































































































































































































































Search results

Summary of Contents for Transport PT878

Reviews:

Brands by name

Popular brands

GE Transport PT878, User Manual

Search results

Summary of Contents for Transport PT878

Reviews:

Brands by name

Popular brands