Chapter 3. Programming Site Data
22
Transport® Model PT878 Portable Liquid Flowmeter User’s Manual
3.1 Entering the Program Menu
To enter the Program Menu, press the
[MENU]
key at the lower right of the
PT878 keypad. The Menu Bar replaces the Status Bar at the top of the
screen. Press the [
X
] arrow key once to scroll from the Site Menu to the
Program Menu. At the Program Menu, press
[ENTER]
. The screen appears
similar to Figure 9 below. While following the programming instructions,
see Figure 139 on page 222 of Appendix A,
Menu Maps
.
Figure 9: Program Menu
To scroll to a particular option, press the [
T
]or [
S
] arrow keys until you
reach the option. Then press
[ENTER]
to open the option window.
When entering parameters in an option, press:
•
The [
T
] key to step through the available parameters
•
The [
S
] key to scroll back to a previously entered parameter
•
The
[F2]
key (Cancel) or the
[ESC]
key to exit an option at any time and
return to Operate Mode without changing the parameters.
Note:
If you enter an incorrect numeric value, press the
[
W
]
key to erase
the last digit entered.
Vel
ocity, ft/s
Signal, dB
0.00
32
Delta
-T, ns
0.10
0.0
Volume, l/s
E0: No Errors
Pipe
Lining
Path
Fluid
Energy
Analog Input
Analog Output
Digital Output
User Functions
Site
Program
Meter Logging Service
Transducer
Co
Correction Factors
