GE StoreSafe Pro, User Manual

Page: 44 / 83

0150-0295A 44 GE Security DVMRe StoreSafe Pro
3.11 Macro
A macro is a recorded sequence of keystrokes. The number of macros depends on the number of
camera inputs. Each macro can have up to 32 keystrokes.
Use this menu to:
•
Enter Macro Record mode.
•
Program a scheduled start time for a macro.
q Main Menu
→
Macro
→
Macro Record
Note: Do not attempt macro programming while the front panel is locked.
To begin recording a macro:
1. Select the macro number you wish to record, then press the
Enter button. The unit will automatically exit the menu
system and go to a starting point. Macro Record mode
is indicated as
F and the Macro Number on-screen.
2. From this point, begin recording the desired keystroke sequence. Record up to 32 keystrokes. If
32 keystrokes are exceeded, the unit will end the macro recording automatically.
3. When finished programming, press the Function button then the Enter button to end the macro
recording. A form is provided in section 10 to keep track of recorded macro functions.
Keystroke count while in the menu system: While recording a macro, entering the
menu system, changing multiple menu items, and exiting the menu system are only
counted as one keystroke. Using the
Jog to navigate the menu system does not count
as keystrokes. Once the menu system has been exited, re-entering the menu system
will count as a second keystroke.
Not all menu items can be programmed using macros. For a complete list of macro
programmable menu items, see the table below.
During macro recording, the following button combinations perform special functions.
Button Sequence Resulting Action
Function then 1. Activate Relay 1 output.
Function then 2. Reset Relay 1 output.
Function then 3. Pause macro for 1 second.
Function then 4. Pause macro for 5 seconds.
Function then 5. Activate Relay 2 output.
Function then 6. Reset Relay 2 output.
Function then Enter. End macro recording
Macro Record
01
Select Macro
NOTE
Macro Record
Timed Macro Start