0150-0295A
27
GE Security DVMRe StoreSafe Pro
Zooming
To activate the 2x digital zoom, select the full screen display of the camera
you wish to zoom, then press the
Zoom
button. Zooming will be indicated by
the LED located directly above the
Zoom
button. Zooming is also indicated
as
ZOOM
on the monitor. Zooming works with frozen and non-frozen
images. Zoomed images can also be frozen.
While Zoomed, use the
Jog/Shuttle
to Pan and Tilt across the image.
Please note, the camera does not move during digital Pan/Tilt.
Press the
Zoom
button again, or another camera button to cancel the Zoom
operations.
Zoom Button
with LED
If the
Zoom
button is pressed while in a multiscreen display, the camera from the last active
cameo is selected for full screen display. Press the
Zoom
button again to activate the Zoom
operation.
2.11 The Print Image Button
Pressing the
Print Image
button will print the currently displayed image. If a
4-way multiscreen is the display mode, StoreSafe Pro will switch to a single
image display of the last selected fullscreen camera, freeze the image, and
send to the default printer.
Print Image Button
Printer Setup
The following equipment and conditions are required for the operation of the Print Image button.
Equipment
HP DeskJet 3820
Hawking Print Server PN7127P
Conditions
The Printer and Print Server must be connected to the same local network as StoreSafe Pro.
StoreSafe Pro must know the Print Servers IP address. The IP address can be input under
Main
Menu – Communications – Ethernet – Ethernet Settings
(See Section 3.16).
The Printer and Print Server must be On-line and Operational.
NOTE
Summary of Contents for StoreSafe Pro
Page 1: ...StoreSafe Pro ...
Page 83: ...0150 0295A ...
