GE SEER Light Service Manual Download Page 30

Page: 30 / 86

2-12

SEER Light Ambulatory Recorder/Controller

Revision B

2019818-008

SEER Light/SEER Light Extend Recorder: Troubleshooting

Recording Cannot Start with the SEER Light Connect Device

Recording cannot start

with the Connect.

Does the controller

display “untransmitted

data?”

Transfer previous data or

press the START button.

Does

the controller display

“Already started?”

Reinstall the batteries over 30
seconds after removing them.

Is the distance

from the Connect

within 4.9 ft

(1.5 m?)

Adjust the position

within 4.9 ft. (1.5 m)

from the Connect.

Does the I.R. window

face the Connect

properly?

Reposition the I.R. windows

to face each other properly.

Remove any obstacles

between the recorder and

the Connect.

Call GE Service.

Yes

Is the USB cable

from the Connect

plugged in?

Plug it in.

Yes

Is the orange LED

on the Connect on?

Call GE Service.

Yes

Summary of Contents for SEER Light























































































Search results

Summary of Contents for SEER Light

Reviews:

Related manuals for SEER Light

Brands by name

Popular brands

GE SEER Light, Service Manual

Search results

Summary of Contents for SEER Light

Reviews:

Related manuals for SEER Light

Brands by name

Popular brands