GE SEER Light Service Manual Download Page 28

Page: 28 / 86

2-10

SEER Light Ambulatory Recorder/Controller

Revision B

2019818-008

SEER Light/SEER Light Extend Recorder: Troubleshooting

ECG Cannot Be Previewed with SEER Light Connect Device

ECG cannot be previewed

with the SEER Light

Connect Device.

Is the distance from

the controller within

4.9 ft. (1.5 m)?

Position the controller

within 4.9 ft (1.5 m).

Is the I.R.

window facing the

controller properly?

Reposition the I.R. window

properly, or remove any

obstacle between the

recorder and the controller.

Were the batteries

installed within one

hour?

Reinstall the batteries.

Has recording

already started?

Call GE service.

Cannot preview ECG by I.R.

operation if more than 3

minutes has elapsed since

recording started.

Yes

Is the USB cable

from the Connect

plugged in?

Plug it in.

Yes

Is the orange LED

on the Connect on?

Call GE Service.

Yes

Summary of Contents for SEER Light























































































Search results

Summary of Contents for SEER Light

Reviews:

Related manuals for SEER Light

Brands by name

Popular brands

GE SEER Light, Service Manual

Search results

Summary of Contents for SEER Light

Reviews:

Related manuals for SEER Light

Brands by name

Popular brands