GE SEER Light Service Manual Download Page 59

Page: 59 / 86

Revision A

SEER Light Ambulatory Recorder/Controller

4-7

2019818-008

SEER Light Connect: Troubleshooting

Cannot Transfer Data from the Recorder to the SEER Light Connect Device

Cannot transfer data to

the Connect.

Is the transfer

cable properly

connected?

Connect the

cable properly.

Does the

controller display “No data

in the recorder?”

No data in the recorder.

Record ECG again.

Is the data output

connector clean?

Clean the data output

connector.

Call GE Service.

Yes

Is the transfer

cable damaged?

Call GE Service.

Yes

Is the USB cable

from the Connect

plugged in?

Plug it in.

Yes

Is the orange LED

on the Connect on?

Attach the Connect to the

recorder.

Yes

Is the green LED on

the Connect on?

Call GE Service.

Yes

Summary of Contents for SEER Light























































































Search results

Summary of Contents for SEER Light

Reviews:

Related manuals for SEER Light

Brands by name

Popular brands

GE SEER Light, Service Manual

Search results

Summary of Contents for SEER Light

Reviews:

Related manuals for SEER Light

Brands by name

Popular brands