GE SEER Light, Service Manual

Page: 21 / 86

Revision B SEER Light Ambulatory Recorder/Controller 2-3
2019818-008
SEER Light/SEER Light Extend Recorder: Component Names and Locations
Component Names and Locations
Structure
The SEER Light ambulatory recorder is shown and described below.
017A
A B
F E D
I
H
G
.60 in.
(15 mm)
3.35 in.
(85 mm)
2.
17 in.
(55
mm)
C J
Table 3. SEER Light Ambulatory Recorder
Item Name Description
A REC LED To display operation conditions:
„ After pressing the start/event button, the LED will flash twice per second for three
minutes. During this time data is not recorded.
„ During recording, the LED will flash every second.
B
start/event button
„ Use to start recording.
„ Use to mark events during recording.
C battery compartment cover Slide the cover to open and set the batteries in the battery compartment.
D
A data output
connector
For transfer of data to the SEER Light controller or to the SEER Light Connect device.
E access LED Will flash during communication with the SEER Light controller.
F infrared terminal (I.R. Window) „ Used to receive the signal from the SEER Light controller to begin ECG recording.
„ Used to receive patient information and ECG recording starting time.
„ Used to confirm the ECG waveform recorded by the recorder (ECG preview).
G
B output connector
Not used.
H DATA LED The LED flashes while transferring data to the SEER Light controller.