RT430
RT430-TM-EN-5
21
Figure 2: Rear view of the RT430
The rear panel of the RT430 comprises two feeding inputs, AC or DC; two BNC connector electrical outputs
for synchronization, one of them insulated; two TTL level screw connector electrical outputs for
synchronization, one of them insulated; two open collector outputs; L
OCKED
contactor relay and one
CMOS/TTL level input; one amplitude-modulated output for IRIG-B124 signal; two optical outputs; RS232
and RS422/485 serial ports; Ethernet network communication ports and GPS antenna input.
For information on installing the equipment, access
Chapter 2
1.6
Technical Specifications
1.6.1
Power Supply
TABLE 3: Power supply specifications.
Operating nominal voltage
100-250 V dc, 110- 240 V ac
Operating voltage range
80-275 V dc, 88-264 V ac
Frequency
50/60 Hz ± 3Hz
Power Consumption
MAX 20VA
Typical 12W
1.6.2
GPS Antenna Input
TABLE 4: GPS Antenna input specifications for temporal synchronizationl.
Signal
GPS L1 (1575.42 MHz), C/A code
Sensibility
152 dBm (After acquisition)
Sensibility
142 dBm (During acquisition)
Number of channels
12
