GE Reason RT430 Technical Manual Download

Page: 55 / 102

RT430

RT430-TM-EN-5

In case the new configuration is not transmitted to the unit, the changes will not be saved and will be

discarded once the Web Interface is closed.

4.3.3

Configuration summary

The table below presents all configurable time parameters and its possible values and variables.

TABLE 34: Summary of configurable time parameters.

Timezone

h: -12 até +12 (hours)

m: 00 ou 30 (minutes)

DST

selected DST enabled

unselected:: DST disabled

Start/End

h: 00 até 23 (hours)

m: 00 até 60 (minutes)

first, second, third

last

(week of the month)

Sunday, Monday, Tuesday, Wednesday, Thursday, Friday

Saturday

(day of the week)

January, February, March, April, May, June, July, August,
September, October, November

December

(month)

4.4

Synchronism outputs

The T

IME

IGNALS

section of the Web Interface, shown in

Figure 30

, allows configuring the signals applied to

the synchronism outputs of the unit.

Summary of Contents for Reason RT430







































































































Search results

Summary of Contents for Reason RT430

Reviews:

Related manuals for Reason RT430

Brands by name

Popular brands

GE Reason RT430, Technical Manual

Search results

Summary of Contents for Reason RT430

Reviews:

Related manuals for Reason RT430

Brands by name

Popular brands