RT430
RT430-TM-EN-5
77
The S
ETUP
section of the Web Interface, shown in
, allows updating the firmware, manipulating
configurations, changing key, and changing configuration username and password. Firmware and key
updates will be described in
Chapter 4.
Figure 44: Section to update firmware, manipulate configurations, change key and change configuration username
and password.
To change the unit key, access the Web Interface S
ETUP
section, typing the unit IP address in a default
browser and follow the steps below:
1. Enter the new
KEY
(36 alphanumeric characters) in the K
EY
field.
2. Click <A
PPLY
> to send the new key to the unit.
3. After clicking <A
PPLY
>, a new window will open requesting username and configuration
password. Enter username and password and click <L
OGIN
>. To cancel the action, click
<C
ANCEL
>.
4. During the transmission, the unit will momentarily go out of operation. A message
communicating the key change will show up on the screen
and password window and the message after the transmission.
