GPS Grandmaster Clock
78
RT430-TM-EN-5
Figure 45: Username and Password Window and the message after the transmission of the new key
5. After the change is completed, check the main page of the Web Interface. See more details
in
Chapter 5
to ensure the correct operation of the unit and the enabled features.
6.4
Cleaning instructions
Before cleaning the equipment, make sure that the primary voltage is removed. If it is necessary cleaning the
exterior of the equipment, use only a dry cloth. Internally it is not required any cleaning.
6.5
Equipment Return
All parts and components comprising Reason devices shall be repaired exclusively by Alstom. In case of
equipment malfunction the customer shall get in contact with Alstom’s Contact Centre and never attempt to
repair the device by his own.
To request equipment repair service, call Alstom to check out shipment options and receive the technical
assistance order code.
The equipment shall be packed in its original package or a suitable package to protect against impacts and
moisture.
Send equipment to address supplied including the sender's identification and the technical assistance
reference.
6.6
Instructions for Equipment Repair/Service for Service Personnel
The instructions presented in this topic shall only be followed by Alstom service Personnel.
In case any repair needs to be done, follow the procedure below to ensure the safety of the operation.
1) Disconnect power supply;
2) Disconnect all other connections leaving the grounding strap to be removed at the end;
3) Perform a visual inspection to make sure the equipment is isolated;
