– 22 –
3. Remove 7 Phillips-head screws from the back of
the oven.
4. Remove the Phillips-head screw from the left
side of the oven.
7. Slide the Outer Cover back about 1 inch toward
the rear of the oven, then lift the cover from the
oven.
5. Remove 8 Phillips-head screws, Grill (See
Grill
.),
and the power cord bracket from the top of the
oven.
6. Slide the cord out from the cutout on top of the
oven.
Cord Bracket
5. Pivot the panel out from the oven. Mark and
disconnect the wire harnesses that connect the
Control Panel Assembly to the oven.
Control Panel Assembly
The Control Panel Assembly consists of a Relay
Board, Smart Board, frame, and a touch pad/
escutcheon. The Control Panel Assembly is attached
to the oven with a Phillips-head screw and 6 tabs.
To remove the control panel assembly:
1. Disconnect power to the oven.
2. Remove the Grill. (See
Grill
.)
3. Remove the Phillips-head screw from the top left
corner of the control panel.
4. Lift the control panel up and disengage the 6
tabs from the oven.
