Index
GFK-2839B
PAC8000* IO PROFINET Scanner
User’s Manual–September 2017
35
Communication Timeout
Control application (PROFINET Controller) should toggle Heartbeat bit (refer Output Control
Register) to indicate it is alive. When there is no update to this bit for more than configured
communication timeout time, the PNS treats it as a communication/application failure and
goes to failsafe state.
0 = Disabled.
Values for communication timeout range 50 ms, 100ms, 200 ms, 500 ms, 1 Sec, 2 Sec, 5
Sec, 10 Sec, 20 Sec, 50 Sec.
SNMP Configuration
From release 2.00 onwards PNS supports SNMP protocol.
Enable SNMP Service = Enables SNMP protocol services in the PNS
Disable SNMP Service = Disables SNMP protocol services in the PNS
