Index
GFK-2839B
PAC8000* IO PROFINET Scanner
User’s Manual–September 2017
31
Chapter 3.
Configuration
This chapter provides general information for configuring a PAC8000 PNS and its IO modules
in a PROFINET-IO network. For information on configuring the PROFINET IO-Controller and
its network, refer to the IO-
Controller manufacturer’s documentation.
Note:
To configure RX3i Controller, refer to the
PACSystems RX3i PROFINET Controller
Manual,
GFK-2571.
This chapter discusses the following topics:
■
Configuration Overview
o
Basic Configuration Steps
o
Configuration Tool
■
Adding a PAC8000 PROFINET Scanner to a LAN
o
Configuring PAC8000 PROFINET Scanner Parameters
o
Configuring PAC8000 Module Parameters
■
Assigning IO-Device Names
■
Clearing the PROFINET IO-Controller Configuration
■
Replacing PAC8000 PROFINET Scanner Hardware
3.1
Configuration Overview
The PAC8000 PNS receives its configuration from a PROFINET IO-Controller, which is
configured by a PROFINET IO configuration tool. The GSDML file provided with the PNS
must be imported into the PROFINET IO configuration tool.
Note:
For details on using the
Proficy Machine Edition PLC Logic Developer
programmer to
create and download the configuration for a PAC8000 PNS in an RX3i PROFINET
network, refer to the
PACSystems RX3i PROFINET IO-Controller Manual,
GFK-2571.
