manualshive.com logo in svg

GE Multilin GEK-113000T, User Manual

The GE Multilin GEK-113000T user manual, an essential guide for operating and troubleshooting this powerful device, can be easily accessed for free download on our website. Ensure seamless usage by referring to our comprehensive manual available at manualshive.com.

Share
Download
background image

GEK-113000T

F650 Digital Bay Controller

3-29

3 HUMAN INTERFACES. SETTINGS & ACTUAL VALUES 3.1 ENERVISTA 650 SETUP SOFTWARE INTERFACE

3

Thanks to the use of a double flash memory, one with the Bootcode startup program and the operative system, and a
second one with the application program (firmware), a high reliability is guaranteed when updating the unit firmware, as
even if the case of a communication breakdown during the firmware upgrade process, we can retry the process for an
unlimited number of times.

•

Upgrade 650 web server (Ethernet connection): Go to 

“Communications> Upgrade 650 web server”

. The relay web

server application can be updated to further versions (if available) using this menu without modifying the relay
operative system.Upload info files to relay (Ethernet connection): Go to 

“Communications>Upload info files to

relay”

. This functionality is used to store setting files (*.650) inside the relay, as well as auxiliary files used by the

programmable logic graphical editor (*.pep, *.aut, *.lib).

•

Download info files from relay (Ethernet connection): Go to 

“Communications>Download info files from relay”

.

This functionality is used for retrieving the files (*.650 and *.pep, *.aut, *.lib) that have been previously stored in the
relay flash memory.

Important Note: 

*.650 files contain protection, control settings, relay configuration and compiled logic
equations. This file can be retrieved from the relay, using the 

“File>Get info from

relay”

 option in EnerVista 650 Setup (through serial or Ethernet communication).

“File>Send info to relay”

 option stores this *.650 file in the relay.

*.pep, *.aut and *.lib files contain the logic configuration projects necessary to modify the
logic (virtual outputs) in the relay. These files can be stored in the relay, using the

“Communication>Upload info files to relay”

 option in EnerVista 650 Setup (through

Ethernet communication). They can be retrieved using 

“Communication>Download

info files to relay”

 option in EnerVista 650 Setup program (Ethernet communication).

Take into account that the *.pep, *.aut and library files are necessary to modify the PLC
logic (virtual outputs). Without these files setting and configuration can be modified but
not logic equations (virtual outputs). It is advisable to use the

“Communication>Upload info files to relay”

 option to store these logic configuration

files into the relay.

It is important to distinguish between “

Send / Get info to relay

” and 

“Upload /

Download info files to/from relay”

. 

“File>Send/Get info to relay”

 

sends/gets

settings and configuration and compiled logic equation to/from the relay (*.650 format),
and the relay automatically starts working with the new settings once they are stored.
“

Communications>Upload/Download info files to relay“

, 

stores/retrieves

 in the

relay hard disk: settings, configuration and compiled logic equations (*.650) besides the
PLC files (*.pep, *.aut, *.lib). This is only a physical storage (file backup).

Summary of Contents for Multilin GEK-113000T




































































































































































































































































Reviews:

No comments

Related manuals for Multilin GEK-113000T

H3C WX5500H series User Configuration Manual preview
WX5500H series
Brand: H3C Pages: 57
XBOX 360 Quick Manual preview
360
Brand: XBOX Pages: 2
C&K systems Securit 800L Specfications preview
Securit 800L
Brand: C&K systems Pages: 2
Lawler 570 Installation Manual preview
570
Brand: Lawler Pages: 2
Jedo Trim User Manual preview
Trim
Brand: Jedo Pages: 26
Lamtec BT300 BurnerTronic Quick Reference preview
BT300 BurnerTronic
Brand: Lamtec Pages: 48
vacuubrand CVC 3000 Instructions For Assembly preview
CVC 3000
Brand: vacuubrand Pages: 12
Vacon 100 INDUSTRIAL Installation And User Manual preview
100 INDUSTRIAL
Brand: Vacon Pages: 47
Vacon 100 flow Installation Instruction preview
100 flow
Brand: Vacon Pages: 40
Valco baby velo Product Reference Manual preview
velo
Brand: Valco baby Pages: 24
Eaton Cutler-Hammer Jockey Instructions Manual preview
Cutler-Hammer Jockey
Brand: Eaton Pages: 12
Watlow DIN-A-MITE C User Manual preview
DIN-A-MITE C
Brand: Watlow Pages: 20
Apricus Sentinel S4 Mounting, Connection, Operation preview
Sentinel S4
Brand: Apricus Pages: 32
Analog Devices Linear Technology ADI Power DC3017A Demo Manual preview
Linear Technology ADI Power DC3017A
Brand: Analog Devices Pages: 12
Bard W3RV2-R Literature Assembly preview
W3RV2-R
Brand: Bard Pages: 102
Vestil BOL-R Series Instruction Manual preview
BOL-R Series
Brand: Vestil Pages: 6
Congatec SMARC conga-SMX8-X Quick Start Manual preview
SMARC conga-SMX8-X
Brand: Congatec Pages: 8
Joie Litetrax Instruction Manual preview
Litetrax
Brand: Joie Pages: 76

Brands by name

Popular brands

Load more brands