GE Moisture Target Series 6, User Manual

Page: 70 / 132

Chapter 3. Operation and Programming
60 Moisture Target Series 6 Hygrometer User’s Manual
3.6.4 Setting Calibration Data 1
Note: If you are using a standard
M Series
probe, the following steps will
apply. If you are using a
VeriDri
probe, see Setting Calibration Data 2
on page 63.
Note: To update calibration data, from the
Settings Menu
select
Cal Data
and press
Enter
. The following screen appears.
Note:
To access the
Cal Data
menu, the
User
Passcode
is required (see section 3.6.1 on
page 56).
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Once the passcode has been entered,
press
Enter
and the following screen
appears.
If you are using a standard
M Series
probe,
the
MH/DP Cal
will be highlighted. Press
Enter
. The following screen appears.