GE Moisture Target Series 6, User Manual

Page: 69 / 132

Chapter 3. Operation and Programming
Moisture Target Series 6 Hygrometer User’s Manual 59
3.6.3 Setting Autocal
Note: To enter the
Autocal Settings
menu, you must be using a standard
M Series
probe. If a
VeriDri
probe is being used,
AutoCal
is not
necessary and will not be accessible.
To change the Autocal settings, from the
Settings Menu select AutoCal and press
Enter
. The following screen appears.
To change the Autocal interval settings,
select
Interval and press Enter . A screen
similar to the following appears.
Use the left and right arrow keys to select
each digit to be changed and the up and
down arrow keys to increase or decrease its
value. Press
Enter to save (or Cancel
to keep the previous value), and return to the
AutoCal Settings
menu.
To accept or reject AutoCal , select Cal Now
and press Enter . A screen similar to the
following appears.
To accept AutoCal , select Yes . To reject
AutoCal
select
No
. Press
Enter
to
confirm your selection and return to the
AutoCal Settings menu.