GE Moisture Target Series 6, User Manual

Page: 60 / 132

Chapter 3. Operation and Programming
50 Moisture Target Series 6 Hygrometer User’s Manual
3.5.2c Setting a Field Separator
To designate a mark to separate the log
fields, from the
Set Log Params menu select
FieldSep
and press
Enter
. The following
screen appears.
Use the arrow keys to select the mark used to
separate the log fields and press
Enter
.
The screen returns to the
Set Log Params
menu.
3.5.2d Setting Log Status Flags
Note:
The flags used to identify the log status are as follows:
To turn log status flags on or off, from the
Set Log Params
menu select
Flags
and press
Enter
. The following screen appears.
Use the arrow keys to select
OFF
or
ON
and
press
Enter
. The screen returns to the
Set Log Params
menu.
Press
Cancel
to return to the
Logging
Menu
.
Range Err No Comm Bad Message No Data Read Err
Over Range No Link Auto Cal No Cal ADC Failure
Under Range Bad CRC No Refs Write Err Cal Error