background image

 

 

MDS 05-6906A01, Rev. R 

TD220MAX Technical Manual 

39 

5.10.2 

Configuration Scripts Menu 

 

Figure 39. Configuration Scripts Menu 

 

TFTP Host Address

 

– The IP address of the TFTP server used for configuration script transfers. 

[Any valid IP address; 127.0.0.1]

 

 

Config Filename 

– The configuration script filename to transfer.

 [40-character filename max; 

cfgscript.txt]

 

 

Transfer Options 

– Access the Transfer Options menu to manage transfer characteristics. See 

Transfer Options Submenu

 for details. 

 

Retrieve File 

– Command the radio to get a configuration file from the TFTP server. 

 

Send File 

– Command the radio to send the configuration file to the TFTP server. 

 
Exporting a 

configuration file saves the radio’s settings as a text file. The file includes some read-only 

settings to help identify different radios Password settings are not exported for security reasons but may 
be imported. These are not exported for security. Upon import, the radio will parse the configuration file 
for changes. Any read-only parameters exported will be ignored on import, even if they are changed. 
 

CAUTION

: As noted on the menu screen; changes made to either the 

Timing Source

 or 

STFP Epoch Size

 

parameters will cause the radio to automatically reboot after the configuration script is retrieved and 
processed. Changing these parameters requires a reboot to keep the radio in proper operation. 

Summary of Contents for MDS TD220MAX





























































Reviews: