LHG LTE kit
LHG LTE with factory installed R11e-LTE modem.
Quickstart
1. While holding the unit by its central column, apply force to the tab, which holds the latch closed, until the
latch pops open.
2. Insert the SIM card into the slot.
3. Assemble case by attaching legs to the base of the unit, please see
Case assembly
paragraph.
4. Mount unit in your desired place, please see
Mounting
paragraph.
5. Connect an Ethernet cable to the Ethernet port, connect the other end of the Ethernet cable to the included
PoE injector.
6. Plug the PoE injector into your network switch or ISP internet outlet.
7. Plug the included power supply into the PoE injector to start up the device. please see
powering
paragraph.
8. Set LAN computer IP configuration to
automatic
(DHCP).
9. Once connected to the wireless network, open http://192.168.88.1 in your web browser to start
configuration, since there is no password by default, you will be logged in automatically.
10. We recommend clicking the “Check for updates” button and updating your RouterOS software to the latest
version to ensure the best performance and stability.
11. Choose your country, to apply country regulation settings (if applicable) and set up your password in the
screen that loads.
Case assembly
1. Attach the two legs to the LHG case by sliding them onto the respective sides, legs are different and
cannot be exchanged (when looking at the product place it that cover for Ethernet port is in front of you, leg
marked R is for the right side, leg marked L is for the left side).
2. Snap the assembled LHG unit to the grid in the appropriate central location.
3. Fix the two legs in place with included two self thread screws (Phillips screwdriver PH2).
The package also contains a grounding cable connector and a 5-degree angle adapter, for easier up or downward
tilt adjustment. See
Mounting
paragraph.
Accessories
Package includes the following accessories that come with the device:
•
DC
⎓
EU/US Switching Power Supply 24 V, 0.38 A, 9 W, Level VI, cable:1.5 m.
•
LHG-390 shim T=2,85 mm with 5-degree angle mark, grounding connector and self thread screws.
•
Hose Clamp SUS304 (Philips type; clamping diameter range 35-70 mm) 2 pcs.
•
Gigabit POE injector.
•
LHG-5G-390 mm Dish 3,0x2.5x0,5 mm.
Expansion slots and ports
•
One 10/100 Ethernet port, supporting automatic cross/straight cable correction (Auto MDI/X). Either straight
or crossover cable can be used for connecting to other network devices. The Ethernet port accepts 9-30 V
DC powering from a passive PoE injector.
•
MiniPCIe slot and SIM slot (can’t be used separately) to be used with a 3G/4G/LTE modem.
See mikrotik.com/products for the latest version of this document.
Document #49088 Modified on: 02.JUL.2019
