24
TD220MAX Technical Manual
MDS 05-6906A01, Rev R
Figure 21. PTP Configuration Menu - PTP Profile: Telecom
•
PTP Profile
– Choose either
None
or
ITU-T G.8265.1 (Telecom profile)
as the PTP profile.
None
uses multicast messaging. The
ITU-T G.8265.1 (Telecom profile)
uses unicast messaging with the
clock specified by PTP Unicast Master.
[None, ITU-T G.8265.1 (Telecom profile); None]
•
Profile Domain Number
–The logical domain the radio should join.
[0-255; 0 for None Profile, 4-
23; 4 for ITU-T G.8265.1 (Telecom profile)]
•
PTP Unicast Master
– the IP address of the PTP grandmaster clock which the radio will send
PTP messages when using the
ITU-T G.8265.1 Telecom
profile.
[Any valid IP address; 192.168.1.1]
•
PTP Unicast Lease
– The time in seconds for the lease to the grandmaster clock before
requesting a new lease.
[60-1000; 300 seconds]
•
PTP Unicast Event Rate
– Controls how many requests are sent between the grandmaster clock
and the radio. For cases where the network is congested, decreasing this number will help
reduce the number of messages sent over the network.
[2, 4, 8, 16, 32 /seconds; 16 /seconds]
•
PTP Delay Mechanism
–
None Profile Only
– choose either
End-to-End (E2E)
or
Peer-to-Peer
(P2P)
to correspond to your network infrastructure.
[End-to-End (E2E), Peer-to-Peer (P2P); End-to-
End (E2E)]
Summary of Contents for MDS TD220MAX
Page 2: ... This page intentionally left blank ...
Page 60: ......
