GE MDS TD220MAX Technical Manual Download

Page: 31 / 60

MDS 05-6906A01, Rev. R

TD220MAX Technical Manual

5.7 Security Configuration Menu

Figure 22. Security Configuration Menu

•

Telnet Access

– If “enabled”, the radio allows user to Telnet to the radio via Ethernet. If

“disabled”, users must manage the radio via SNMP or the serial console.

[enabled, disabled;

enabled]

•

User Passwords

– Menu that allows modification of the admin, guest, and integrator logins.

•

SNMP Mode

– The mode of operation of the SNMP Agent. Choices are disabled,

v1_only

v2_only

v3_only

v1-v2

, and

v1-v2-v3

. If the mode is disabled, then the Agent will not respond to

any SNMP traffic. If the mode is

v1_only

v2_only

, or

v3_only

, then the Agent will only respond to

that version of SNMP traffic. If the mode is

v1-v2

, or

v1-v2-v3

, then the Agent will respond to the

specified versions of SNMP traffic.

[disabled, v1_only, v2_only, v3_only, v1-v2, v1-v2-v3; disabled]

Summary of Contents for MDS TD220MAX





























































Search results

Summary of Contents for MDS TD220MAX

Reviews:

Related manuals for MDS TD220MAX

Brands by name

Popular brands

GE MDS TD220MAX, Technical Manual

Search results

Summary of Contents for MDS TD220MAX

Reviews:

Related manuals for MDS TD220MAX

Brands by name

Popular brands