16
TD220MAX Technical Manual
MDS 05-6906A01, Rev R
5.0
Menu Interface
The menu interface can be reached via two ways; serially via the DB25 connector or by Telnet via the
Ethernet Interface. This section will describe the different menus available on the radio.
Configurable settings are followed by information in brackets. The information includes a comma-
separated list of possible values then a semicolon and the default value. For example, a setting followed
by
[
disabled
,
enabled
;
disabled
]
means the possible values are
disabled
or
enabled
and the default value
is
disabled
.” In some cases, the parameter may be freeform for a customer to enter information. In that
case, the minimum and maximum of characters the parameter can take will be listed.
Login with the administrator user name and password. When logged in, the Starting Information Screen is
displayed.
Figure 10. Starting Information Screen
•
Device Name
– User-configured name for this radio. Set this from the
Device Names
menu.
•
IP Address
– IP address for this radio. Set this from the
IP Configuration
menu.
•
Device Status
– This is a display of the status of the radio and can be the following;
•
Initializing
– appears during startup and/or internal RF deck
reprogramming.
•
Operational
– when functioning properly.
•
Alarmed
– when an error condition(s) exists. Click the letter “A” on the
keyboard to view the alarm.
•
Location
– User-configured location for this radio. Set this from the
Device Names
menu.
•
Serial Number
– The manufacturer’s serial number for this radio. Set by the factory and cannot
be changed.
•
Uptime
– The elapsed time since the radio was started.
•
Current Firmware
– The version number of the currently operating firmware.
•
Current User
– The current user’s login level.
Summary of Contents for MDS TD220MAX
Page 2: ... This page intentionally left blank ...
Page 60: ......