74
MDS NETio-TB Installation & Operation Guide
05-4801A01, Rev. A
7.3.3 Changing WeXP RF Channel
The WeXP RF channel for a Base Module is set using the WeXP Con-
figuration Menu shown in
Figure 7-7
(
Main Menu>Wireless Con
fi
gura-
tion>WeXP Con
fi
guration
). To change the channel, select
Channel Number
and enter any number between
12
and
23
.
7.3.4 WeXP RSSI and Backplane Communication
Statistics
The communications performance for WeXP and the NETio Backplane
can be viewed via the I/O Module Configuration Menu (
Figure 7-5 on
Page 72
). To view the performance, select
Module Performance/Statistics
from this menu. If this selection is made from a Base Module then the
menu shown in
Figure 7-8
is displayed. If the selection is made from a
Wireless Expansion Module then the menu shown in
Figure 7-9
appears.
Invisible place holder
Figure 7-8. I/O Module Statistics Menu
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8298-MDS-Net-IOE-7-Radio-Expansion-I/O-Radio-Module.aspx