22
MDS NETio-TB Installation & Operation Guide
05-4801A01, Rev. A
Invisible place holder
Figure 2-7. TransNET Command Screen
2.3.5 WeXP Configuration Menu
To configure the WeXP parameters, return to the main Wireless Config-
uration Menu (
Figure 2-6
), and select
B
to access the WeXP Configura-
tion menu.
NOTE:
The Base Module is the master WeXP radio. All NETio Wire-
less Expansion Modules you wish to associate with this Base
Module must have the same unique WeXP Network Address.
The WeXP Configuration menu is where you set the unique WeXP Net-
work Address in the Base Module. This address will also be configured
into each Wireless Expansion Module that you wish to associate with
this Base Module. The WeXP channel, power level and timeout limit
(for failsafe applications) may also be set here.
Quick Start
Step #7:
Select
B
and enter the WeXP Network Address. It is recommended
that the last 4 digits of the Base Module’s serial number be used for
this entry. Proceed to
Section 2.3.6
.
RSPSupply - 1-888-532-2706 - www.RSPSupply.com
http://www.RSPSupply.com/p-8298-MDS-Net-IOE-7-Radio-Expansion-I/O-Radio-Module.aspx