KTD-405/KTD-405A Controller Keypad
User Manual
22
Supervisor programming
As explained in
Entering programming modes
on page 21, to enter the supervisor menus, from the
ENTER
PROGRAMMING CODE
menu, press
1-4-7-6-seq
.
Note:
This is the default factory supervisor programming code sequence. After you install your KTD-405 keypad, be sure to
change the supervisor programming code as soon as possible to avoid security problems. To change the programming
code, see
Figure 27
on page 26
of this menu. This is a critical number since it is needed to change any of the access
codes. Be sure to store the new number in a safe place. If the number is lost, GE Security technical support can help you
reset the keypad to factory defaults. All keypad setup information will be lost.
1. At the first menu in supervisor programming mode, you have the option to erase the keypad’s
nonvolatile memory and reloads factory values. If you chose
YES
, you have these further options:
RESET ALL.
Resets all stored settings to factory default.
RESET ALL BUT TITLES.
Retains the zone titles, but sets everything else to factory defaults.
In addition, this screen allows you to reinitialize CyberScout cameras so that they find all of their
orientation points. Access the CyberScout you want to reset before you enter supervisor
programming. CyberDomes are reset from the CyberDome programming menus. Refer to the
CyberDome Programming Manual
. Pressing
forwards you through programming without
changing set parameters.
To skip this menu and go to the next, press - or .
Figure 17. Supervisor programming menu tree
Note:
Only CyberScout cameras are reset (reinitialized) when you select
3
. CyberDomes must be reset from the
CyberDome programming menus. Refer to the
CyberDome Programming Manual
.
RESET TO DEFAULTS?
NO
(+)=YES (-)=NO
NEXT
PARTIAL. ARE YOU SURE?
(+)=YES (-)=NO
NEXT
RESET CAMERA X ?
ARE YOU SURE? +,YES -,NO
COMPLETE. ARE YOU SURE?
(+)=YES (-)=NO
NEXT
1 = RESET ALL BUT TITLES
2 = RESET ALL 3 = CAMERA
INITIALIZING DEFAULTS
PLEASE WAIT
KEYPAD ADDRESS: 99
(01-99)
NEXT
Summary of Contents for KTD-405
