GE KTD-405, User Manual

Page: 33 / 76

Chapter 3
Programming
29
6. The following access menus ( Figure 33 ) are
used to restrict the keypad from addressing
specified sites in the system.
The access menus enable you to allow
access for each camera, monitor, DSR/
VCR, and multiplexer. To move from
one type of access menu to another,
press or .
Note: If you do not want to interrupt viewing at
another keypad, program the keypad to
address only the monitors within its view.
Figure 33. Access menus
7. Pressing + displays the following menu
( Figure 34 ). The VCR output can be
assigned an input number on the matrix
switcher. When a VCR is called, the matrix
switcher switches to the assigned input.
Enter a number from 1 through 511, or enter
0 for NONE.
Figure 34. VCR access display
8. These menus ( Figure 35 ) are used to
configure multiplexers.
9. Use or or the joystick to scroll through
multiplexer manufacturers.
10. If the DVMRe/multiplexer’s outputs are
connected to an input on a matrix switcher,
enter the input number (1 to 511, or 0 for
none).
11. Enter the number of outputs (1 to 5)
connected to the matrix switcher. This
returns you to the
MPLX xx ACCESS menu.
Note: Outputs must be connected in sequential
order to inputs if more than one output
from a single DVMRe/mux is used.
Figure 35. Multiplexer access display
CAMERA 000 ACCESS? YES
(+)=YES (-)=NO NEXT
MONITOR 01 ACCESS? YES
(+)=YES (-)=NO NEXT
DSR/VCR 01 ACCESS? YES
(+)=YES (-)=NO NEXT
VCR 01 MATRIX INPUT:
000 (0=NONE) NEXT
MPLX 01 ACCESS? YES
(+)=YES (-)=NO NEXT
MPLX01 BRAND DVMRE DUP
(
K
,
L
)=SELECT NEXT
MPLX 01 MATRIX INPUT?
000 (0=NONE) NEXT
SELECT MAX OUTPUTS: 02
(
K
,
L
)=SELECT NEXT