Oven Timer
The oven timer will automatically
start and stop your oven cooking or
self-cleaning operation for you.
For automatic oven cooking:
1. Push COOK TIME button.
2. Turn SET knob to set length of
baking time.
3. Push BAKE button.
4. Turn SET knob to set desired
temperature.
When cook time is reached, the
End-of-Cycle Tone will sound and
the oven will turn off.
During automatic cooking:
●
You can push the STOP TIME
button to find out when the
of-Cycle Tone will sound and the
oven will turn off.
●
You can push the CLOCK button
to display time of day without
canceling the oven operation.
—
To Delay Starting an
Automatic Oven Operation
If a delayed cooking operation
is desired:
1. Push COOK TIME button.
2. Set length of baking time with
SET knob.
3. Push STOP TIME button.
4. Turn SET knob to time of day
when baking should be completed.
The oven control will not permit
you to set a stop time that is less
than the length of cooking time
plus the current time of day.
5. Push BAKE button.
6. Turn SET knob to desired
temperature.
When stop time is reached, the
End-of-Cycle Tone will sound and
the oven will turn off.
Caution: We strongly
recommend that you wait no
longer than one hour before
cooking meats and poultry.
Never let any food
in the oven
for more than 2 hours before
cooking starts. Room temperature
is ideal for the growth of
bacteria. Be sure oven light is off
because heat from the bulb will
speed bacteria growth.
NOTE: You can push the STOP
TIME button to find out when the
oven will turn off.
How to Change
a Program
When a function has been
entered, you can recall what
has been programmed by
pushing the corresponding
function button. The messages
in the display show you which
function is currently being
displayed. While the function is
displayed, you can change it
with the SET knob. You can
change any programmed
function at any time.
Tones
End-of-Cycle Tone (3 long
one second on, one second off):
shows that a timed oven operation
has reached STOP TIME or that
the Timer has counted down.
Attention Tone (series of short
beeps, until proper response is
given): will sound if oven has only
been partially programmed. For
example, if you have selected a
cook time but no temperature,
you will hear the Attention Tone
until you select a temperature or
push CANCEL.
Notification Tone (single,
second beep): indicates oven has
stabilized at selected temperature.
Key Tone (single, l/10-second
beep): sounds when any button
is pushed.
Function Error Tone (series of
very rapid beeps). The display
show a Function Error Code, “F]:’
etc. Cancel the Function Error
Tone by pushing the CANCEL
button. Allow oven to cool for
hour. Reset oven control. If the
Function Error Tone starts again,
call for service, mentioning the code
that appeared. Disconnect the range
electrical supply to stop the tone.
If the function error occurred
while you were programming the
Oven Control, push the CANCEL
button and try again.
To Cancel the Tone..
you don’t
want an audible tone when you
push a button, you can eliminate
the Key Tone by pushing and
holding the CANCEL button until
you hear a short beep (in
approximately two seconds). To
activate the tone again, push and
hold the CANCEL button once
more until you hear a short beep.
Canceling or activating the tone
should only be done when there is
no oven operation programmed.
Pushing the CANCEL button will
clear all functions except the Clock
and Timer.
25
