Care and Cleaning
Proper care and cleaning
procedures are essential for a
long and satisfactory life for your
ovens. Included in this section are
directions and a
Cleaning Guide
(on next page) for cleaning all parts
of the ovens. When cleaning an
oven manually, wearing of rubber
gloves is recommended to protect
the hands.
Porcelain Enamel Finish
The porcelain enamel finish is
essentially glass fused on steel at
high temperature and is breakable
if misused. This finish is
resistant. However, any acid foods
spilled (such as lemon or other
citrus fruit juices, or mixtures
containing tomato or vinegar)
should be wiped up immediately.
See guide for cleaning suggestions.
Lamp Replacement
CAUTION: BEFORE
REPLACING ANY LAMP,
DISCONNECT ELECTRIC
POWER
OVEN AT THE
MAIN FUSE OR CIRCUIT
BREAKER PANEL. LET LAMP
(OR BULB) AND LAMP COVER
COOL COMPLETELY.
The oven lamp (bulb) is covered
To remove:
●
Hold hand under cover so it
doesn’t fall when released. With
fingers of same hand, firmly push
back wire bail until it clears cover.
Lift off cover. DO
REMOVE
ANY SCREWS TO REMOVE
COVER.
. Replace bulb with 40-watt home
appliance bulb.
To replace cover:
●
Place it into groove of lamp
receptacle. Pull wire bail forward
to center of cover until it snaps into
place. When in place, wire holds
cover firmly. Be certain wire bail is
in depression in center of cover.
●
Connect electric power to oven.
with a glass removable cover which
is held in place with a bail-shaped
wire. Remove oven door, if desired,
to reach cover easily.
23
