GE GL 311 F3/4031 P/VE, Operating Instructions Manual

Page: 134 / 146

S
LOW
O
PERATION FOR
M
AINTENANCE
P
URPOSES
134 / 146
OI 250 (EN) REV7
/REV3
Safety in General
• Any manipulations of the equipment that do not conform to
instructions may endanger both the individuals performing the
manipulations and the spring mechanism.
• If manipulations are performed on the spring mechanism that are
not in compliance with FK3-.. instructions, then the individual
performing the manipulations is at risk of death or injury. The
spring mechanism can also be damaged in the process
Personal Safety When Performing Manipulations on the Ope-
rating Mechanism
• After the control voltage is turned off, the closing spring is
charged. Although the control voltage is interrupted, accidental
operations are possible when performing manipulations on the
operating mechanism.
• Touching moving parts poses a risk of injury.
• Spring mechanisms with undervoltage releases open
immediately as soon as the control voltage is interrupted.
• This can lead to injury when manipulations are being performed
on the spring mechanism.
• If the motor voltage is switched on, the motor will immediately
begin to charge the closing spring.
• Touching moving and/or spring-charged parts poses a risk of
injury.
Perform only manipulations that comply with these instruc-
tions.
DANGER
After control voltage has been interrupted, discharge the
springs by executing opening, closing and opening operati-
ons using the manual releases.
WARNING
Prevent unintentional or accidental opening operations by
locking the undervoltage releases.
WARNING
Keep parts of the body away from any moving or spring-
charged parts when turning on the control voltage.
WARNING