background image

31 

Door Hinge Removal 
1.  Remove the door.

2.  Remove the door frame.

3.  Remove the hinge assembly from the door 

cover.

4.  Remove the eight 1/4 in. hex hinge cover screws 

and set hinge cover aside.

5.  Lift the hinge to remove.

NOTE: When reinstalling the hinge, ensure that the 
hinge bushings are in place.

Door Latch

Door Latch Removal
1.  Remove the door assembly.

2.  Remove the door frame.

3. 

8VLQJDÀDWEODGHVFUHZGULYHUSU\WKHPHWDO
VWLȺHQLQJEUDFNHWRȺWKHGRRUODWFK

4.  Squeeze the latch at the tabs and push through 

the door frame.

Door Mask

The  door mask is a cosmetic part used to cover the 
inside bottom section of the door frame.

Door Mask Removal   
1.  Remove the door assembly.

2.  Remove the door frame. 

3.  Remove the two 1/4 in. hex door mask screws.
4.  Lift the door mask to remove.

See Door Removal on page 28.

See Door Frame Removal on page 30.

1/4" hex

1/4" hex

1/4" hex

1/4" hex

1/4" hex

1/4" hex

1/4" hex

1/4" hex

See Door Removal on page 28.

See Door Frame Removal on page 30.

Tab

Tab

See Door Mask Location on page 28.

See Door Removal on page 28.

See Door Frame Removal on page 30.

Summary of Contents for GFDR485GF
























































Reviews: