14
Diagnostics
Service Mode Entry
The control must be in the idle state to enter Service Mode.
Press and release My Cycle, then press and release Delay Dry, then press and release My Cycle, then press
and release Delay Dry. T1 will be displayed if keys were properly pressed.
• Rotate the cycle select knob CW to increase the test number.
• Rotate the cycle select knob CCW to decrease the test number.
• Press the Start key to enter a test.
• Turn the cycle select knob to exit the test.
Service Mode Exit
Press the Power key or disconnect power from unit. Service Mode will automatically time out after 5 minutes
if there is no user activity.
Service Mode Tests
Test #
SSD
Test Function
1
t1
Model Codes
2
t2
UI Software Version
3
t3
XML Version
4
t4
Error Codes
5
t5
CRC Non-Volatile Memory
6
t6
User Interface
7
t7
Outlet Thermistor
8
t8
Inlet Thermistor
9
t9
Moisture Sensor
10
t10
Door Open/Closed
11
t11
Water Valve
12
t12
Restore EEPROM
13
t13
Drum
Service Mode
My Cycle
Delay Dry
